The Lotos LT3500 Plasma Cutter is designed for light cutting projects. This unit is the most compact plasma cutter one can find in the market and weighs only 8kg (17.6lbs). In the meantime, this powerful unit is strong enough to cut 10mm (2/5inch) metal with 15mm (3/5inch) severance thickness, making it an ideal choice for cost conscious DIY hobbyists. The LT3500 is similar to the Lotos LT3200 model except it has a higher amperage range up to 35 A under 110V, has a pre-installed air filter and air gauge ready to be connected to your air compressor with the stand NPT 1/4" industry type D coupler (can be setup quickly within 2 minutes).
★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty.
★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
LT3500 |
||
|
||
General Specification |
Input Voltage |
110 V~125V ±10%, 1-PH, 50/60Hz |
Input Current |
50A |
|
No-load Voltage |
110V |
|
Working Environment Humidity |
≤90% |
|
Ambient Temperature |
-10~40°C |
|
Dimensions |
11.6” (259mm) L 6” (152.4mm) W 9” (230mm) H |
|
Weight |
17.6lbs (8kg) |
|
Rated Duty Cycle |
35% @35A |
|
Power Cable |
6’ (1.8m) |
|
|
||
Plasma Cutting Specification |
Output Current |
12~35A |
Output Voltage |
100V |
|
Gas Supply |
Clean, dry, oil-free air |
|
Recommended Pressure/Flow Rate |
0.6~0.75Mpa 3.0scfm @70psi |
|
Pilot Arc Start Mode |
High Frequency |
|
Maximum Severance Cutting Thickness |
12mm (1/2inch) |
|
|
||
Material |
Mild Steel |
Normal Cut 10mm (3/8inch) @35A |
Stainless Steel |
||
Aluminum |
||
|
||
Warranty |
New Unit |
30 days refund and a 3-YEARS limited Warranty: include 1 year NEW Replacement Warranty (Contiguous US ONLY)
|
Showing reviews 1-10 of 30 | Next
Posted by Brian Riemer on Jul 9th 2019
Cut 2 old pick up truck bed floors out with it very quick! one the bed floors was .125"
Posted by John Thorogood on Jun 20th 2019
I like the over all quality of construction but haven't had a chance to use it yet. It was a father's day gift and I will give a rating on its performance after I have used it.
Posted by Michael Mallick Jr. on Jun 19th 2019
Works good, gets hot and needs to cool down way too often though.
Posted by Edward Williams on Jun 1st 2019
For simple cutting.
Posted by Karl Campbell on Mar 11th 2019
This review is about the Uwelding customer service than the plasma cutter. I have had the LT3500 plasma cutter for a little over a year and have not done any heavy cutting. Last week, I started having problems with the torch head not cutting for long. After one phone call to Alex and an email with pics today, I received the tracking number for the new torch head a few hours later. That alone makes this little jewel worth its weight in gold, IMHO. Thanks Alex!
3-13-19 Update - received the new torch head and it has a two prong plug rather than the three that the "red painted" version of this torch has. I emailed Alex again and within 15 minutes, I received an email with a three to two pin adapter. Thanks again Alex!
Posted by syeven wells on Mar 2nd 2019
I normally use commercial equipment. This is a little bad ass unit .
Posted by Ted on Feb 23rd 2019
This unit was so simple to set up and use. I was cutting sheet steel in minutes. Lots of fun, vs hand cutters.
Posted by Bob. on Feb 15th 2019
Unit stopped working after thirty minutes of use. Was being used to cut 26g galvanized sheet metal. Have not returned.
Posted by Ashton heidemann on Feb 15th 2019
This thing is amazing I¡¯ve been citing out mounts for my truck out of 1/4 in and this thing dose it without a sweet there¡¯s no negative comments I have for this plasma cutter
Posted by Roger Herdrich on Feb 5th 2019
This is a useful metal cutting tool at a very good price. It is certainly is not a high capacity production tool, but for occasional light to medium metal fabrication it is excellent. My 4 star rating is because it is limited in speed and material cutting thickness.
For my uses this is a good tool and an excellent value.
Showing reviews 1-10 of 30 | Next
|