null
  Loading... Please wait...
  • Call us on 4087392329 or  Email us at: support@lotostechnology.com
  • My Account
  • Gift Certificates
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5

Lotos LTP7500CNC Non-Touch Pilot Arc CNC Digital Plasma Cutter, THC Torch Height

$899.00

Product Description

The new, redesigned LOTOS Supreme  No-HF CUT series is a non-high frequency start machine. The “blow-back” type start that is used is generally safe for use without interference and is ideal for both CNC and general use. Blow-back type start involves a rearward movement of the electrode within the torch head when forced by the air pressure. When air pressure is applied the movement of the electrode off its seated position against the inner surface of the circuit grounded nozzle creates a spark, energizing the plasma stream.

With this plasma cutter, the user can achieve smooth, clean and uniform cuts on a wide range of surfaces with minimal heat input and without distortion of metal. It is very easy to use by the DIY user, while fully accommodating the demands of professional operators.

Features:

  • With the reliable Blow-Back non-high frequency start, the LOTOS Supreme LTP7500DCNC is suitable for CNC application meaning there will be no interference on your CNC computer system.
  • The torch features a “BLOWBACK” design with a Euro-type Central connector. Offering improved consumable life with a patented “BACK STRIKING” design.
  • The Non-HF Start pilot arc torch with a Euro-type Central connector offering improved consumable life with a patented “BACK STRIKING” design
  • 2T/4T Function enabled.
  • Latest IGBT Inverter Technology
  • The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor.

Package Includes:

  • IGBT Invertor power supply
  • 16ft Blowback Non-HF Start Cutting Torch
  • Consumables
  • Ground Clamp
  • Pre-Installed NPT 1/4” Industry Type D Plug Quick Connector
  • Pre-Installed Air Filter Regulator.

Specifications:

PRODUCT LITERATURE

 

LTP7500CNC User Manual

 

 

 

 

 

 

 

GENERAL SPECIFICATIONS

 

Input Voltages

 Standard 220/ 240 V (+-15%)

50/60Hz 1 Phase

 

Maximum Rated Output 

 

75 A

 

Operating Air Pressure

 

Minimum (Safety Cut-Out Threshold): 35 psi

 

Recommended(Set with Air Flow set to “Constant Flow”): 40-70 psi

 

Maximum (From Compressor/Tank) :75 psi

 

 

Duty Cycle @ 40°C (104°F)

 

60% @ 75 A 

100%@ 50 A

 

Dimensions with handle

 

620 x 375 x 400mm

 

Weight

 

36 lbs.

 

CNC Part

 

Yes

 

Recommended Gas Inlet Flow Rate / Pressure

 

4.0cfm @ 75psi (Min. pressure: 65psi)

 

Ideal Cut Thickness (Hand Torch)

 

1’’ ( 20mm )

 

Max Severance Cut @ 3 IPM (Steel)

 

1.25’’ ( 30mm )

 
 

 

WARRANTY

 

1 Year Warranty Included

 

* Production cutting thickness are the results of Lotos laboratory testing. Production speeds are approximately 80% of maximum. For optimum cut quality, cutting speeds may vary based on different cutting applications.

 

 For any Limited Warranty claim, a valid Proof of Purchase from our Authorized Dealers and a Valid US Shipping Address is required. Warranty valid in the US only and for orders from our authorized dealers. We do not have any authorized deals outside the US. We cannot cover warranty outside the US(e.g. Canada, Mexico)

 

Warranty Information

IMPORTANT: Effective May 1st, 2014, Lotos Technology’s product warranty terms is revised as the following:

Lotos Technology warrants that all equipment sold by our company, unless otherwise specifically stated, will be free from defects in materials and workmanship for a period of 1 year from date of shipment. Such warranty shall not apply in any event to failure or defects in materials due to normal wear and tear, failure to perform recommended or customary maintenance procedures, exposure to detrimental elements, improper or extended storage, or corrosion, and shall not extend to any person or entity other than the customer.

Please visit Return and Repair for more information on product return process and our 30-Day Satisfaction Guaranteed.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
SKU:
LTP7500CNC
Weight:
36.00 LBS
Shipping:
Free Shipping
 
SecurityMetrics Credit Card Safe