The Lotos LTP5000D Plasma Cutter delivers strong cutting performance in a compact package. An optimized design based on state-of-the-art MOSFET transistors provides high power output for thick metal cutting, as well as steady output for thin metal cutting. Using Pulse-Width-Modulation (PWM) technology, the inverter power supply generates powerful DC welding currents. By employing switch power inverter technology, the dimensions and weight of the main transformer is significantly reduced; while efficiency is increased by 30%. The LTP5000D is an excellent choice for home DIY jobs and light duty small business projects.
★ NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty.
★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
Features
Package Includes
Compatible Consumable Sets for this BROWN Color LTP5000D Plasma Cutter are " PCS22", "PCS33", or "PCS77".
It CANNOT compatible with Lotos "PCON20" "PCON40" or "PCON90" consumables sets or any other third part consumables set.
To run 110V requires the Pig Tail(model PT01), which does not come with the packages. It is sold separately.
Specifications
PRODUCT LITERATURE |
|
|
GENERAL SPECIFICATIONS |
Input Voltages |
110~220V, 1-PH, 50/60Hz |
Input Current |
50A@110V, 1-PH/ 40A@220V, 1-PH |
|
Output Current |
10~50A |
|
Duty cycle @ 40°C (104°F) |
60% @ 50A, 110V 60% @ 50A, 220V |
|
Dimensions with handle |
15” (381mm) L 6” (152.4mm) W 12” (304.8mm) H |
|
Weight |
26lbs (11.8kg) |
|
Gas Supply |
Clean, dry, oil-free air |
|
Recommended Gas Inlet Flow Rate / Pressure |
3.6scfm @ 65psi |
|
Input Power Cable Length |
6’ (1.8m) |
|
Maximum Severance Cut Thickness* |
3/4” |
|
MATERIAL* |
Mild Steel |
Max. 5/8” (16mm) @ 50A |
Stainless Steel |
Max. 1/2” (12mm) @ 50A |
|
Aluminum |
Max. 1/2” (12mm) @ 50A |
|
WARRANTY |
30 days refund and a 3-YEARS Limited Warranty: |
* Production cutting thickness are the results of Lotos laboratory testing. Production speeds are approximately 80% of maximum. For optimum cut quality, cutting speeds may vary based on different cutting applications.
* For any Limited Warranty claim, a valid Proof of Purchase from our Authorized Dealers and a Valid US Shipping Address is required. Warranty valid in the US only and for orders from our authorized dealers. We do not have any authorized deals outside the US. We cannot cover warranty outside the US(e.g. Canada, Mexico)
Please visit http://www.uwelding.com for more welding and cutting tools by Lotos Technology. For more details about LOTOS LTP500D, click http://www.uwelding.com/50-Amp-Pilot-Arc-Plasma-Cutter-LTP5000D-p/ltp5000d.htm Thank you for watching! Don't forget to "like" this video or subscribe to our channel :)
IMPORTANT: Effective May 1st, 2014, Lotos Technology’s product warranty terms is revised as the following:
Lotos Technology warrants that all equipment sold by our company, unless otherwise specifically stated, will be free from defects in materials and workmanship for a period of 1 year from date of shipment. Such warranty shall not apply in any event to failure or defects in materials due to normal wear and tear, failure to perform recommended or customary maintenance procedures, exposure to detrimental elements, improper or extended storage, or corrosion, and shall not extend to any person or entity other than the customer.
Please visit Return and Repair for more information on product return process and our 30-Day Satisfaction Guaranteed.
Showing reviews 1-10 of 163 | Next
Posted by Rick on Sep 15th 2019
I researched plasma cutters for a while. This one has excellent reviews but was just slightly out of my price range. I finally decided to spend the extra money and I am glad I did. So far I have ripped through 3/16" steel plate like butter. 1/4" angle amazingly fast. It lives up to the great reviews and I am proud to give it 5 stars. This little unit is small but powerful. It has saved me numerous hours already on the first day. Leaves a nice cut, quite and runs off of my small 5 gallon compressor no problem. If you are thinking about buying a plasma cutter, I would highly recommend this one. I just wish I would have bought it sooner.
Posted by Unknown on Jul 10th 2019
Easy setup, cuts mild steel like hot knife through butter. Does the same for 4130 chrome molly. It's size fits comfortably on my welding table. I did have to change the power plug to a NEMA 6-50P to fit the 220 socket I use for my welders.
Posted by tattoowarrior69 on Jul 10th 2019
Ok I had a chance test the plasma cutter out on the 120 volt , actually I was very impressed with cutting ability of this machine ! It¡¯s a awesome tool for your home shop it cut thicker metal that I expected on a 120 v setting at 30 and 35 amp setting which is max on 120 volt side , yes it did work even better on 220 volts but For portability and hobby type projects 120 volt is sufficient and does a great job, if your planning on a barbecue pit of any large size , recommend you use 220 voltage. At 120 on 30 amp breaker I did cut 1/4 inch material with no trouble. The biggest thing to get use to is the speed you drag the torch and yes this is a pilot arch torch, which I recommend it¡¯s just so much easier ! You will need to order the 120 adapter pig tail for 120 voltage , not included definitely a great plasma cutter for the price !
Posted by Ren on Jun 27th 2019
I have a project need to cut quater inch steel. The little machines¡¯s cutting speed is fast and cutting edge is smooth. Save me hours to finish the whole project. Lotos made my day!
Posted by Theodore B. on Jun 25th 2019
Really don't know what I'm doing seems to work okay I need a better air compressor to really try it but I think it works good so far
Posted by Mike Ried on Jun 24th 2019
Lasted maybe 6 months at most now won¡¯t work at all
Posted by Jason Shroff on Jun 23rd 2019
Ground cable it¡¯s short other than that it¡¯s great
Posted by Brad on Jun 19th 2019
It works pretty well. I have been impressed so far by this thing. Who knows how long it's going to work for but for now it has worked flawlessly and worked well. I have cut some 1/4" stainless with it and it was not that pretty of a cut but it did the job with acceptable results. I have no idea how efficient it will be on consumables so maybe not for a shop but for a home gamer? This all coming from a guy that has only otherwise used Hypertherm plasma cutters.
Posted by Zyloch on Jun 13th 2019
I needed a cutter for personal small hobby projects and this came highly recommended. So far I haven't had a problem with it and was pretty easy to setup and start using right away. Tried it mostly on quarter inch stainless steel. I'll post a video when I get time.
Posted by Thomas R. on Jun 11th 2019
Used it for a larger project in my garden. Works as advertised. The consumables are durable - costs me only two nozzles for my whole project. So far I am satisfied with it.
Showing reviews 1-10 of 163 | Next
|