The Lotos Technology LTP7000 IGBT plasma cutter is one of the most powerful inverter plasma cutters on the market. The pilot arc feature is especially useful for continuous cutting on rough surfaces or dirty metal. It has been re-designed to incorporate the latest high frequency inverter technology using IGBT, along with PWM (Pulse Width Modulation), the combination of which help deliver a far more constant, concentrated and precise current to the cutting surface. With this plasma cutter, the user can achieve smooth, clean and uniform cuts on a wide range of surfaces with minimal heat input and without distortion of metal. It is very easy to use by the DIY user, while fully accommodating the demands of professional operators.
Features:
Package Includes:
Specifications:
PRODUCT LITERATURE | ||
GENERAL SPECIFICATIONS |
Input Voltages |
220~240V, 1-PH, 50/60Hz |
Input Current |
220~240V, 1-PH, 50A |
|
Output Current |
20~70A |
|
Power Efficiency |
85% |
|
Duty cycle @ 40°C (104°F) |
60% @ 70A 100% @ 50A |
|
Dimensions with Handle |
19” (483mm) L 12” (305mm) H 8” (203mm) W |
|
Weight |
43lbs (19.5kg) |
|
Gas Supply |
Clean, dry, oil-free air |
|
Recommended gas inlet flow rate / pressure |
4.8cfm @ 75psi (Min. pressure: 65psi) |
|
Input power cable length |
6’ (1.8m) |
|
Maximum Severance Cut Thickness* |
1 1/4”Inch (32mm) |
|
MATERIAL* |
Mild Steel |
|
Stainless Steel |
||
Aluminum |
||
WARRANTY |
1 Year Warranty Included |
* Production cutting thickness are the results of Lotos laboratory testing. Production speeds are approximately 80% of maximum. For optimum cut quality, cutting speeds may vary based on different cutting applications.
IMPORTANT: Effective May 1st, 2014, Lotos Technology’s product warranty terms is revised as the following:
Lotos Technology warrants that all equipment sold by our company, unless otherwise specifically stated, will be free from defects in materials and workmanship for a period of 1 year from date of shipment. Such warranty shall not apply in any event to failure or defects in materials due to normal wear and tear, failure to perform recommended or customary maintenance procedures, exposure to detrimental elements, improper or extended storage, or corrosion, and shall not extend to any person or entity other than the customer.
Please visit Return and Repair for more information on product return process and our 30-Day Satisfaction Guaranteed.
Posted by Kevin rowland on Oct 6th 2016
I had bought a plasma cutter that had a defect get past the tech person, the shipping lable was sent too me and it was sent back. And a week later after it reached sunnyvale CA. I had a perfect working 70 anp plasma in short order,Thanks
|