This is a Lotos New Year Special Deal for Lotos golden product CT520D which is footpedal ready. Machine comes with improved cutting torch and improved PCB boards. A 220VAC 30A power plug is pre-installed on power cord for Lotos customers. (if you prefer to use 110vac, please remove this plug and install 110vac plug accordingly) 1 Year Warranty.
FREE S&H to 48 States by UPS (Tracking Number is available for each shipment) Note: FREE shipping is only applied to Lower 48 states customers.
Shipping for international customers is not FREE. UK and other European Countries: 175 dollars. Australia: 260 dollars. Canada: $45. Brazil: $175. If you need this machine immediately, please check Lotos dealers in your area. www.uwelding.com/dealers.html
General Description of 2010 New Lotos CT520D W/ Power Plug and Digital Display
As one of the largest manufacturers of plasma cutting, tig/stick, arc (MMA) welding equipment in the world, LotosTech is proud to offer an extensive selection of industrial plasma cutting and tig/stick welding machine, CT520D. Lotos CT520D is designed and constructed to withstand extensive use in rugged industrial and construction environments. It is perfect for any home project too.
Lotos CT520D is a THREE-IN-ONE Digital Inverter Plasma Cutter (50A) / Tig Welder (200A) / Stick (MMA) welder (200A). You would have to purchase 3 separate machines to do what this ONE machine can do!
Using this portable plasma cutter is cheaper than Oxyacetylene after just a few cuts. Less cleaning, less maintenance, less noxious gases, less fire hazard, simply less overall work and a better, cleaner cut. The torch trigger can be moved for a custom fit. It can be used in finger or thumb positions. Torch head is low profile for tight spaces. High Frequency DC Plasma cuts thicker materials than standard DC plasma cutters. High Frequency Plasma cuts faster with less distortion in the work piece.
It's packed with full features like the separate machines. The Tig welds from this CT520D are clean and strong. This Tig welder is easier to use than any other Tig welder on the planet! Just flip a switch, set your amperage and weld...It's that simple. This machine will weld Steel, Stainless Steel, Moly, Ferrous,
An ARC welder is a necessity in any industrial shop or home workshop. There are welding jobs that simply require ARC or SMAW (Shielded Metal Arc Welding). Stick welding is cheap and effective. Fill large gaps, holes, weld cast iron and weld extra thick steel with stick. With Arc welding, no shielding gas is required. In many ways stick arc welding is like MIG except there is no wire feed, you have to do that manually.
Automatic Dual Voltage (110VAC/220VAC) Dual Frequency (50Hz/60Hz)
High quality FUJI Mosfets (total 12 pieces) from Japan
Brand new yet double function tested and performance tuned prior to shipping
PAPST cooling system from German
1 Year Warranty on Parts and accessories and 1 Year Warranty on Labor from a trusted U.S. company
Input Voltage: 110vac ~220vac (Auto detected, no switch is necessary)
Input Power Frequency: 50 hz / 60 hz (Better performance under 60 hz)
Insulation Grade: B
Housing Protection Grade: IP21
Size: 21'' L x 16'' W x 11'' H
Weight: 39 lbs (43 lbs with box)
Certification: CE, CCC, CSA and ISO-9001 certification
Power factor: 0.93
Power efficiency: 85%
Plasma Cutting
Duty Cycle: 60% at 50 amps and 100% at 35 amps
Rated Input Current: 27 amps
3" Per minute @ 1" Steel (Severance Cut)
7" Per minute @ 3/4" Thick Steel
17" Per minute @ 1/2" Thick Steel
Air pressure required: 60~70 psi @ 3.6 cfm
Tig Welding
Output Current: 15-200 Amps
Power Usage 17 Amps @ 220VAC
No Load Voltage: 62V
Can Weld: Steel, Stainless, Moly, Ferrous
Duty Cycle: 60% @ 200 Amps 100% @ 105 Amps
High Frequency Start / HF Welding
Working Voltage: 16.9V
Gas Flow: 2-5L/min (using Argon supply)
Arc/Stick/MMA Welding
Output Current: 15-200 Amps
Power Usage 23 Amps @ 220VAC
No Load Voltage: 62V
Can Weld: Steel, Stainless, Moly, Ferrous
Duty Cycle: 60% @ 200 Amps 100% @ 95 Amps
High Frequency Start / HF Welding
Working Voltage: 25 Volts
Accessories
Plasma cutting torch.
Tig Welding Torch with 11 ft hose (with long and short caps)
Ground cable (9 ft) with clamp.
Initial cutting consumables (tip, electrode, o-ring and shield cup).
Air filter and regulator with accessories and brackets
Air hose (longer one)
Argon regulator (U.S. standard argon regulator)
Stick (ARC) Holder
220VAC power plug
User Manual
You shall provide 60~70 psi air supply, 110vac power plug for plasma cutting if you prefer to use 110vac.
Ampage adjustable Footpedal is optional for this machine.(Footpedal is not included in the package, but it is available from Lotos store)
Tungsten electrodes are standard which are available from any welding shop. If you directly get from us, we offer 50% off of any retail price.
Solar powered Auto-darkening welding helmet is NOT included in the listing but it is available from Lotos store for $50
10 Reasons to buy from Lotos
(1) Lotos is a well-known brand name for portable pneumatic tools with a lot of dealers/distributors both in United states and other countries. Buy from a U.S. licensed company for real warranty support.
(2) We use real 50A plasma cutting torch instead of 40A or over-rated 60A cutting torch which will damage your cutter. The size of our tips are much larger than traditional 40A PT-31 consumables.
(3) We offer FREE USA standard argon regulator.
(4) We offer 1 years warranty on Labor and Parts.
(5) We offer real 200A tig welder and stick welder, other sellers may sell 180A tig welder and 160A stick welder.
(6) We installed 220VAC UL-Certified Power Plug for this machine
(7) We offer 7 days Money back (if the item is not defective, we will charge 25% restocking fee)
